Sinorock® anchor nut includes domed anchor nut and hex anchor nut.

Office hours(GMT+8): 8:30-18:00

sinorock@sinorockco.com

86-379-65287220

86-379-65179771

No.1703, Building 3, No. 1 Fenghua Road,High-tech,District , Luoyang , China (Henan)Pilot Free Trade Zone, Henan Province, P.R. China.

Home > Product > Self Drilling Anchor Bolt System > T Thread Anchor System > Anchor Nut

Anchor Nut

Sinorock® anchor nut is galvanized for corrosion protection. It can be used in various conditions and is easy to install.

Description

Introduction:

Sinorock® has domed nut and hex nut. The domed nut has chamfered edge on one end. The hex nut has chamfered edges on both ends. Both of them are made of steel to suit the anchor bar and anchor plate.

Characteristic:

1. It can be used for both doomed plate and flat plate.

2. All nuts exceed the ultimate strength of the self drilling anchor bar.

3. It can meet the stringent demands on anchor specification.

4. Hot dip galvanizing for corrosion protection.

Hex Nut

Size	Key Size (mm)	Length (mm)	Weight (Kg/pc)	Note
SST30	46	35	0.29	Heat treatment
SET30	46	35	0.31	Without heat treatment
SST40	65	50	0.92	Heat treatment
SET40	65	50	0.92	Without heat treatment
SST52	80	70	1.74	Heat treatment
SST52	80	70	1.74	Without heat treatment
SST76	100	75	2.40	Heat treatment
SST76	100	80	2.67	Heat treatment
SET76	100	80	2.67	Without heat treatment
SET111	150	120	10.20	Without heat treatment

Spherical Collar Nut

Size	Key Size (mm)	Length (mm)	Weight (Kg/pc)	Note
SST30	46	35	0.33	Heat treatment
SET30	46	35	0.33	Without heat treatment
SST40	65	50	0.86	Heat treatment
SST40	65	50	0.86	Without heat treatment
SST52	80	70	2.30	Heat treatment
SST52	80	70	2.30	Without heat treatment
SET73	95	70	1.90	Without heat treatment
SET103/78	125	80	3.42	Without heat treatment
SET103/51	125	130	5.60	Without heat treatment
SET127	140	140	7.50	Without heat treatment
SET130	175	175	17.90	Without heat treatment